Valtra N Series Tractors

Valtra N Series Tractors

Valtra N Series tractors are available in four different model types: Versu, Direct, HiTech 5 and HiTech.

The Valtra N Series represents Nordic practicality at its best, encouraging year-round use even in the most demanding conditions.

The Valtra N Series with its compact design and power range up to 163 horsepower offers the ideal solution for most tasks on livestock and crop farms – as well as for municipal and forest applications in keeping with Valtra’s philosophy.

  • Outstanding front-loader tractor
  • Reliable AGCO Power engine in all models
  • Spacious and ergonomic cab offers excellent visibility in all directions
  • Valtra Arm – ergonomically located controls in Versu and Direct models
  • Very quiet working environment with noise levels as low as 70dBa
  • TwinTrac reverse drive controls as option in all models
  • AgCommand™ telemetry system as option

Valtra N Series Tractors Versu

Versu – Driving with comfort

  • Five powershift gears – 30 speeds in both directions
  • Ergonomic Valtra Arm -armrest with easy access to powershift, cruise control, hydraulics, linkage controls and U-Pilot headland management system
  • Easy and comfortable driving with automated transmission functions and brake assist
  • Load sensing hydraulics with 115 l/min or 160 l/min output
  • Separate transmission and hydraulic oils
  • Automatic steering and telemetry systems available as options

Valtra N Series Tractors Direct

Direct – Stepless Power

  • Efficient continuously variable transmission made in Finland
  • Excellent fuel economy: the tractor automatically adjusts the engine speed to the load and runs at the lowest possible revs.
  • Full control and high pulling power even at speeds as low as 10 m/h.
  • Ergonomic Valtra Arm -armrest with easy access to CVT lever, cruise control, hydraulics, linkage controls and U-Pilot headland management system
  • Load sensing hydraulics with 115 l/min or 160 l/min output
  • Separate transmission and hydraulic oils
  • Automatic steering and telemetry systems available as options

Valtra N Series Tractors HiTech

HiTech 5 – User-friendly Powershift

  • Five powershift gears – up to 30 speeds in both directions
  • Transmission functions controlled via pushbuttons on an ergonomically located fixed lever.
  • Easy and comfortable driving with automated transmission functions
  • Automated shifting of the four main gears – no gear lever required
  • HiTrol turbine clutch option for smooth start-and-stop
  • Open centre hydraulics, mechanically controlled valves
  • Hydraulics with 73l/min or 90l/min output

Valtra N Series Tractors

HiTech – Reliable Powershift

  • Three-step powershift – up to 36 gears in both directions
  • Easy and comfortable driving with automated transmission functions
  • HiTrol turbine clutch option for smooth start-and-stop
  • Open centre hydraulics, mechanically controlled valves
  • Hydraulics with 73l/min or 90l/min output

Field Work & Transport

Increased working comfort
For increased comfort during transport work and long days on the field N HiTech tractors can be equipped with front axle suspension as well as a suspended cab. Automatic air conditioning  and Xenon work lights add to the well-being and safety of the driver.

High performance also in demanding pulling work
For situations where even the standard weight and ratio of Valtra tractors need to be topped, the tractors can be equipped with additional belly, wheel or front weights already at the factory. The ground speed PTO option further increases the performance on the field and in transport. Where local legislation permits, larger N Series tractors are available with a 50km/h transmission. Road transport tyres can be specified with your tractor directly from the factory.

Reduced risk of accidents and injury
Valtra tractors include standard safety features such as the easy access to the cab, safety belts, ergonomically placed linkage controls, hydraulic multidisc brakes or the tractor’s central power switch. In addition a range of ex-factory options further reduce the risk of accidents and injury. Pneumatic trailer brake valves are available in countries where legislation permits. The cab can also be equipped with a fire extinguisher, an emergency handbrake, a beacon, additional Xenon work lights and many more.

Grassland Work

Increased working comfort
Valtra N Series tractors can be specified with cab and front axle suspensions, as well as a range of comfort features for the cab. When working with a mower conditioner or flail mower, the TwinTrac reverse drive system will not only improve ergonomics but also gets the job done faster and with more precision.

Compatibility even with large implements
Valtra tractors offer an excellent lifting range of rear and front links. In addition the favourable power-to-weight ratio and optional front-, belly- or tyre weights ensure excellent traction even with large implements. The additional hydraulic output is an unsurpassed Valtra option. ISOBUS implement control readiness gives you full control over your implements both in front and the rear.

Loader Work

Smooth start & stop work
Valtra N Series tractors offer a range of automated transmission features that reduce the need to shift. Combining the programmable forward-reverse shuttle with the optional HiTrol turbine clutch makes start & stop work extremely smooth and precise.

Versatile tractor use
Valtra tractors can be uniquely customized to handle a variety of tasks on the farm. A wide range of front loaders and loader implements are available directly from the factory. The attachment and detachment of the loader is very easy.

Perfect control even in cramped spaces
Valtra N Series tractors are very compact and agile allowing for easy operation even in tight spaces. The factory-fitted Valtra loaders are a perfect fit to the tractor’s structure. This ensures unobstructed movement of the tyres and a small turning radius also in front loader use.

Reduced risk of accidents and injury
Valtra tractors include many standard safety features such as easy and spacious access to the cab, polycarbonate windows, a central power switch, a weight-sensor on the driver’s seat or an emergency PTO switch at the back of the tractor. The tractor can be equipped with additional features such as a passenger safety belt, a fire extinguisher, an emergency handbrake, a reversing buzzer and many more.

Forest Work

Specialised machinery with increased resale value
In part-time forest contracting a customized Valtra forest tractor is a cost-efficient alternative to a specialized forest machine. Valtra and its partners offer a range of options and equipments that turn your Valtra tractor into a true harvesting, forwarding, chipping, mulching or skidding expert.

Reliable operation even in uneven terrain
The structure and design of Valtra tractors makes them ideal for forest use: high ground clearance with a flat underside, excellent visibility from the cab, excellent ergonomics and a driver’s seat that turns 180 degrees are standard features. In addition you can specify your tractor with equipment designed to further protect you and your tractor: a steel subframe, steel-fuel tank, a specially reinforced forest cab, special forest tyres and many more.

High hydraulic output for maximum results
All Valtra N Series tractors can be equipped with an optional higher capacity pump. If you require even more power, Valtra’s partners offer a front pump designed especially for your Valtra providing all the extra hydraulics you need, for example for controlling the harvester head.

[one_half  last=”no”]Versu

Field N123 Versu N143 Versu N163 Versu
Engine
Engine type 49AWI 49AWI 49AWI
Number of cylinders 4 4 4
Capacity (l) 4.9 4.9 4.9
Power kW / hp / r / min (ISO 14396)
Max. power, kW/hp/rpm * 99/135/2000 112/152/2000 120/163/1900
Max. power with boost, kW/hp/rpm * 105/143/2000 118/160/2000 126/171/1900
Torque Nm / r
Max. torque 600/1500 600/1500 650/1500
Max. torque with boost 650/1500 650/1500 700/1500
Transmission
Transmission type Versu Versu Versu
Gears forward/reverse * 30+30R 30+30R 30+30R
Speeds min-max, km/h * 3.6-50 [1] 0.6-50 [1] 0.6-50 [1]
PTO
Type 2 Speed 2 Speed 2 Speed
540 / rpm 1874 1874 1874
540E / rpm 1539 1539 1539
1000 / rpm 2000 2000 2000
1000E / rpm
Front 1000/rpm ** 1920 1920 1920
Ground speed option option option
Hydraulics
Type LSECV [?] LSECV [?] LSECV [?]
Max. pump output l / min (optional) 115(160) 115(160) 115(160)
Max. hydraulic valves rear 4 4 4
Max. hydraulic valves front ** 3 3 3
Hydraulic oil available for implements, litres 40/47 40/47 40/47
Rear linkage (AutoControl)
Max. lift capacity at link ends, kN 81 81 81
Max. lift range mm 850 850 850
Slip control
Drive Balance control x x x
Front linkage
Type Optional Optional Optional
Max. lift range, mm
Max. lift capacity at link ends, kN 35 35 35
Brakes
Brake type
Hydraulic parking brake integrated to power shuttle Standard Standard Standard
Weights and measures mm
Tyres 520/85R38 + 420/85R28 520/85R38 + 420/85R28 520/85R38 + 420/85R28
Wheelbase (mm) 2665 2665 2665
Length (mm) 4664 4664 4664
Width (mm) 2538 2538 2538
Height (mm) 2945 2945 2945
Turning radius (m) 4.5 4.5 4.5
Ground clearance rear axle (mm): 500 500 500
Weight (full tanks, kg) 5450 5450 5600
Fuels
Fuel tank, std l 230 230 230
AdBlue tank, l 27 27 27
[/one_half] [one_half  last=”yes”]Direct

Field N123 Direct N143 Direct N163 Direct
Engine
Engine type 49AWI 49AWI 49AWI
Number of cylinders 4 4 4
Capacity (l) 4.9 4.9 4.9
Power kW / hp / r / min (ISO 14396)
Max. power, kW/hp/rpm * 99/135/2000 112/152/2000 120/163/1900
Max. power with boost, kW/hp/rpm * 105/143/2000 118/160/2000 126/171/1900
Torque Nm / r
Max. torque 600/1500 600/1500 650/1500
Max. torque with boost 650/1500 650/1500 700/1500
Transmission
Transmission type Direct Direct Direct
Gears forward/reverse * CVT CVT CVT
Speeds min-max, km/h * 0-50 0-50 0-50
PTO
Type 2 Speed 2 Speed 2 Speed
540 / rpm 1874 1874 1874
540E / rpm 1539 1539 1539
1000 / rpm 2080 2000 2000
1000E / rpm
Front 1000/rpm ** 1920 1920 1920
Ground speed option option option
Hydraulics
Type LSECV [?] LSECV [?] LSECV [?]
Max. pump output l / min (optional) 115(160) 115(160) 115(160)
Max. hydraulic valves rear 4 4 4
Max. hydraulic valves front ** 3 3 3
Hydraulic oil available for implements, litres 40/47 40/47 40/47
Rear linkage (AutoControl)
Max. lift capacity at link ends, kN 81 81 81
Max. lift range mm 850 850 850
Slip control
Drive Balance control x x x
Front linkage
Type Optional Optional Optional
Max. lift range, mm
Max. lift capacity at link ends, kN 35 35 35
Brakes
Brake type
Hydraulic parking brake integrated to power shuttle Standard Standard Standard
Weights and measures mm
Tyres 520/85R38 + 420/85R28 520/85R38 + 420/85R28 520/85R38 + 420/85R28
Wheelbase (mm) 2665 2665 2665
Length (mm) 4664 4664 4664
Width (mm) 2538 2538 2538
Height (mm) 2945 2945 2945
Turning radius (m) 4.5 4.5 4.5
Ground clearance rear axle (mm): 500 500 500
Weight (full tanks, kg) 5450 5450 5600
Fuels
Fuel tank, std l 230 230 230
AdBlue tank, l 27 27 27
[/one_half] [one_half  last=”no”]HiTech 5

Field N103 HiTech 5 N103.4 HiTech 5 N113 HiTech 5 N123 HiTech 5 N93 HiTech 5
Engine
Engine type 33AWI 44AWI 44AWI 44AWI 33AWI
Number of cylinders 3 4 4 4 3
Capacity (l) 3.3 4.4 4.4 4.4 3.3
Power kW / hp / r / min (ISO 14396)
Max. power, kW/hp/rpm * 82/111/2000 82/111/2000 91/124/2000 99/135/2000 73/99/2000
Max. power with boost, kW/hp/rpm * 89/121/2000 96/130/2000 105/143/2000
Torque Nm / r
Max. torque 465/1500 460/1500 510/1500 540/1500 430/1500
Max. torque with boost 490/1500 530/1500 560/1500
Transmission
Transmission type 5PS 5PS 5PS 5PS 5PS
Gears forward/reverse * 20+20R (30+30R) 20+20R (30+30R) 20+20R (30+30R) 30+30R 20+20R (30+30R)
Speeds min-max, km/h * 3.5-40 3.6-40 (0.8-40) 3.6-40 (0.8-40) 0.6-50 [1] 3.5-40
PTO
Type 2 Speed 2 Speed 2 Speed 2 Speed 2 Speed
540 / rpm 1874 1874 1874 1874 1874
540E / rpm 1539 1539 1539 1539 1539
1000 / rpm 2000 2000 2000 2000 2000
1000E / rpm
Front 1000/rpm ** 1920 1920 1920
Ground speed option option option option option
Hydraulics
Type OSMCV [?] OSMCV [?] OSMCV [?] OSMCV [?] OSMCV [?]
Max. pump output l / min (optional) 73 73(90) 73(90) 73(90) 73
Max. hydraulic valves rear 4 4 4 4 4
Max. hydraulic valves front ** 2 2 2 2 2
Hydraulic oil available for implements, litres 30/40 30/40 30/40
Rear linkage (AutoControl)
Max. lift capacity at link ends, kN 53 (77) 58 (77) 58 (77) 77 53 (77)
Max. lift range mm 850 850 850 850 850
Slip control
Drive Balance control x x x x x
Front linkage
Type Optional Optional Optional Optional Optional
Max. lift range, mm
Max. lift capacity at link ends, kN 28 35 35 35 28
Brakes
Brake type
Hydraulic parking brake integrated to power shuttle Standard Standard Standard Standard
Weights and measures mm
Tyres 420/85R38 + 340/85R28 460/85R38 + 380/85R28 460/85R38 + 380/85R28 460/85R38 + 380/85R28 420/85R38 + 340/85R28
Wheelbase (mm) 2387 2665 2665 2665 2533
Length (mm) 4329 4436 4664 4664 4329
Width (mm) 2538 2550 2538 2538 2538
Height (mm) 2875 2875 2875 2875 2875
Turning radius (m) 4.5 4.5 4.5 4.5 4.5
Ground clearance rear axle (mm): 480 480 480 480 480
Weight (full tanks, kg) 4700 5020 5020 5070 4700
Fuels
Fuel tank, std l 220 230 230 230 220
AdBlue tank, l 27 27 27
[/one_half] [one_half  last=”yes”]HiTech

Field N103 HiTech N103.4 HiTech N113 HiTech N123 HiTech N143 HiTech N93 HiTech
Engine
Engine type 33AWI 44AWI 44AWI 44AWI 49AWI 33AWI
Number of cylinders 3 4 4 4 4 3
Capacity (l) 3.3 4.4 4.4 4.4 4.9 3.3
Power kW / hp / r / min (ISO 14396)
Max. power, kW/hp/rpm * 82/111/2000 82/111/2000 91/124/2000 99/135/2000 112/152/2000 73/99/2000
Max. power with boost, kW/hp/rpm * 89/121/2000 96/130/2000 105/143/200 118/160/2000
Torque Nm / r
Max. torque 465/1500 465/1500 510/1500 540/1500 600/1500 430/1500
Max. torque with boost 490/1500 530/1500 560/1500 650/1500
Transmission
Transmission type 3PS 3PS 3PS 3PS 3PS 3PS
Gears forward/reverse * 24+24R 24+24R (36+36R) 24+24R (36+36R) 36+36R 36+36R 24+24R
Speeds min-max, km/h * 3.5-40 3.6-40 (0.8-40) 3.6-40 (0.8-40) 0.6-50 [1] 0.6-50 [1] 3.5-40
PTO
Type 2 Speed 2 Speed 2 Speed 2 Speed 2 Speed 2 Speed
540 / rpm 1874 1874 1874 1874 1874 1874
540E / rpm 1539 1539 1539 1539 1539 1539
1000 / rpm 2000 2000 2000 2000 2000 2000
1000E / rpm
Front 1000/rpm ** 1920 1920 1920 1920
Ground speed option option option option option option
Hydraulics
Type OSMCV [?] OSMCV [?] OSMCV [?] OSMCV [?] LSECV [?] OSMCV [?]
Max. pump output l / min (optional) 73 73(90) 73(90) 73(90) 73(90) 73
Max. hydraulic valves rear 4 4 4 4 4 4
Max. hydraulic valves front ** 2 2 2 2 2 2
Hydraulic oil available for implements, litres 30 30/40 30/40 30/40 30/40 30
Rear linkage (AutoControl)
Max. lift capacity at link ends, kN 53 (77) 58 (77) 58 (77) 77 77 53 (77)
Max. lift range mm 850 850 850 850 850 850
Slip control
Drive Balance control x x x x x x
Front linkage
Type Optional Optional Optional Optional Optional
Max. lift range, mm
Max. lift capacity at link ends, kN 28 35 35 35 35 28
Brakes
Brake type
Hydraulic parking brake integrated to power shuttle Standard Standard Standard Standard Standard Standard
Weights and measures mm
Tyres 420/85R38 + 340/85R28 460/85R38 + 380/85R28 460/85R38 + 380/85R28 460/85R38 + 380/85R28 460/85R38 + 380/85R28 420/85R38 + 340/85R28
Wheelbase (mm) 2533 2665 2665 2665 2665 2533
Length (mm) 4329 4436 4664 4664 4664 4329
Width (mm) 2538 2550 2538 2538 2538 2538
Height (mm) 2875 2875 2875 2875 2875 2875
Turning radius (m) 4.5 4.5 4.5 4.5 4.5 4.5
Ground clearance rear axle (mm): 480 480 480 480 480 480
Weight (full tanks, kg) 4700 5020 5020 5050 5050 4700
Fuels
Fuel tank, std l 220 230 230 230 230 220
AdBlue tank, l 27 27 27 27
[/one_half]
Please contact us for further information on models, specifications, finance and trade in values.