McHale Bale Wrappers

Mchale-Bale-Wrappers-991LB-Mounted-Bale-Wrapper

991L Round Bale Wrapper

The McHale 991L range of linkage round bale wrappers is the first choice for farmers and contractors who are interested in wrapping bales at the storage site. The 991L range of linkage round bale wrappers offers the perfect blend of tried and tested technology with solid construction and dependable performance.

Like all McHale round bale wrappers, the high output 991L range of linkage round bale wrappers will give you a tightly wrapped bale that increases feed quality and contains the natural juices for greater nutritional value, while giving increased environmental protection.

All 991LB linkage round bale wrappers are manual machines where a series of four levers control the bale wrapping functions.

Linkage Round Bale Wrapper – McHale 991LB – Manual – Linkage Round Bale Wrappers

The 991LB linkage round bale wrapper is a manual machine where four individual levers control all wrapping functions. This 991LB round bale wrapper can be powered either from a tractor or an independent power pack. On the 991LB round bale wrapper the control valve can either be mounted beside the dispenser post or just outside the tractor cab.

The RDS control unit measures the revolutions per minute and monitors the number of layers as they are being applied to the bale, a beep sounds on the second last rotation, this gives the operator sufficient time to slow down the wrapping table.

Linkage Wrapping Table – McHale 991LB – Manual – Linkage Round Bale Wrappers

The wrapping table on the 991LB linkage round bale wrapper is constructed of four heavy-duty belts, which ensure smooth and even bale rotation even when dealing with loose or asymmetric round bales.

A smooth wrapping seal is guaranteed as the machine delivers a 50% overlap. Shear bolt protection ensures that asymmetric shaped bales do not damage the machines gearbox or drive line.

Dispenser Units -McHale 991LB – Manual – Linkage Round Bale Wrappers

The 991L linkage round bale wrapper is fitted with a 750mm aluminium dispenser, which is standard on all McHale round bale wrappers and maintains a consistent stretch, which maximises film usage. The unit consists of two aluminium rollers, which are geared to each other with robust steel gears of different ratios.

The dispenser unit on the 991L linkage round bale wrapper is designed so that the angle that they work at during the bale wrapping cycles stays constant. This gives a more even stretch through the roll of film. The dispenser unit also features a McHale quick fit system to make film changing much more user friendly.

Quick Fit Dispensers – McHale 991LB – Manual – Linkage Bale WrapperThe dispenser lock and load system on the 991LB linkage round bale wrapper makes film loading really easy. When removing the core of the used roll the dispenser bobbin locks in place. When a new roll is loaded it can be locked in place by simply pulling the cord.

Hydraulic Cut and Hold – McHale 991LB – Manual – Linkage Bale WrapperThe McHale hydraulically operated cut and hold system on the 991LB linkage round bale wrapper cuts and holds the film in position ready to wrap the next bale. This time saving device eliminates the need to manually reattach the film. Uniquely designed, this system works reliably and consistently in all weather conditions.

RDS – In-cab control unit – McHale 991LB – Manual – Linkage Bale WrapperThe in-cab control unit on the 991L linkage round bale wrapper enables the operator to change the number of table rotations (layers) and select the desired number of film layers. The control unit also allows the operator to store bale totals from different jobs.

Please contact us for further information on models, specifications, finance and trade in values.

McHale Bale Handlers

Mchale-Bale-Wrappers-991BC-Trailed-Bale-Wrapper

991B Trailed Bale Wrapper

The McHale 991B range of round bale wrappers sets the pace for efficient and effective round bale wrapping. The 991 round bale wrapping range features practical design, quality components and precision engineering making the McHale bale wrapping range the first choice for contractors and farmers.

Packed with practical and reliable features, the 991BC round bale wrapper is designed with the efficient operator in mind. Round bale wrapper users should look towards the hydraulically operated cut and tie system, the efficient round bale wrapper dispenser, which maximises film usage and the 991B round bale wrappers patented ground supported damper system. Like all McHale round bale wrappers, the high output 991B bale wrapper range will deliver a tightly wrapped silage bale that contains all the natural juices, ensuring increased nutritional value, while improving environmental protection.

Control Options – McHale 991BC Cable Controlled Round Bale Wrappers

The 991BC round bale wrapper is the base level machine, on this round bale wrapper four levers allow the operator to control the;

  • lift arm
  • wrapping table
  • cut and hold
  • table tip/ damper

Ground Supported Damper – McHale 991BC Cable Controlled Round Bale Wrappers

All McHale 991B round bale wrappers feature the uniquely designed McHale patented ground supported bale damper system. This is one of the most important features on the McHale round bale wrapper range.

Only a McHale round bale wrapper will give you a ground supported bale damper, which will gently lower the wrapped round bale to the ground and at the same time eliminate all stress to the chassis of the round bale wrapper. When the rotating wrapping table on the 991B round bale wrapper stops and is raised to the tip position, the heavy-duty bale damper raises to cradle the bale while a second arm is lowered automatically to the ground. The heaviest of round bales can then be gently lowered eliminating any damage.

Hydraulic Cut and Hold – McHale 991BC Cable Controlled Round Bale Wrappers

The McHale round bale wrapper range is fitted with a hydraulically operated cut and hold system, which at the end of the wrapping cycle cuts and holds the film in position ready to wrap the next round bale of silage. This time saving device eliminates the need to manually reattach the wrapping film. Uniquely designed, this system, which is fitted as standard on all 991B trailed bale wrappers works reliably and consistently in all weather conditions.

Quick Fit Dispensers – McHale 991BC Cable Controlled Round Bale Wrappers

The McHale 991 Round Bale Wrapper dispensers lock and load system makes film loading really easy. When removing the core of the used roll the dispenser bobbin locks in place. When a new roll is loaded it can be locked in place by simply pulling the cord.

Heavy Duty Chassis & Lift Arm – McHale 991BC Cable Controlled Round Bale Wrappers

The 991 round bale wrapper chassis and lift arm have been extensively tested over the last 15 years. Many McHale round bale wrappers in the market place have wrapped 150,000 bales and customers have been more than happy with the way this heavy-duty bale wrapper has stood up to the task.

Round Bale Wrapping Table – McHale 991BC Cable Controlled Round Bale Wrappers

The round bale wrapping table is constructed of four heavy-duty belts, which ensure smooth and even bale rotation even when dealing with loose or asymmetric bales.

A smooth wrapping seal is guaranteed as the machine delivers a 50% overlap. Shear bolt protection ensures that asymmetric shaped bales do not damage the machine\’s gearbox or drive line.

Auto Stop – McHale – 991BC Cable Controlled Round Bale Wrappers

The 991BC round bale wrapper comes complete with an autostop function, which means that once the bale wrapping rotation lever is engaged and the bale wrapping process is started the bale wrapping table will continue wrapping the bale until the preset number of table rotations is complete. When the bale wrapping process is complete the table will automatically stop in an offset position so that the bale can be tipped from the bale wrapper table with the simple pull of a lever.

RDS Wizard Control Box – 991BC Cable Controlled Round Bale Wrappers

The wizard control console monitors round bale wrapper operations on the 991BC round bale wrapper. The operator can set the number of layers to be applied and can monitor the revolutions per minute of the bale wrapping table. The wizard control console also allows the operator to store two job totals.

Optional Side Tip – 991BC Cable Controlled Round Bale Wrappers

An optional side tip is available on all McHale 991B round bale wrapper models. This allows the machine to eject the bales on their ends after wrapping is complete.

The main advantage of a side tip system is that

  • it tips the bales on their ends where there is more plastic, thus reducing damage in stubbly fields.
  • it allows the round bales to hold their shape better.
Please contact us for further information on models, specifications, finance and trade in values.

McHale-991-Highspeed-Bale-Wrappers

991 High Speed Bale Wrapper

McHale the bale wrapper specialists have introduced a new model, the 991 High Speed, a bale wrapper, which can deliver 50% more output.

The McHale 991 high speed bale wrapper sets the pace for efficient and effective round bale wrapping. The 991 high speed bale wrapper features practical design, quality components and precision engineering making the McHale bale wrapping range the first choice for contractors and farmers.

The two 750mm aluminium dispensers maintain a consistent stretch, which maximises film usage. The dispenser units consist of two aluminium rollers, which are geared to each other with robust steel gears of different ratios. The two dispensers on the 991 High Speed are stepped so that there is an overlap where the two sheets of plastic come together.
Please contact us for further information on models, specifications, finance and trade in values.

McHale-HS2000-HSB-High-Speed-Baler-Wrapper

HS2000 Round Bale Wrapper

The McHale HS2000 high speed round bale wrapper brings high speed trailed and inline round bale wrapping to a new level!

The lift arm on the HS2000 round bale wrapper is designed to centre the bale and the wrapping table cradles the bale gently into the bale wrapping position. When the bale is in position on the HS2000 round bale wrapper the wrapping process commences with the two 750mm dispensers quickly wrapping the round bale. The all-weather cut and ties automatically cut and hold the film and the wrapping table tips rearward placing the wrapped silage bale on the ground.

Dual purpose high speed round bale wrapper

The HS2000 round bale wrapper is a dual-purpose machine, which can be operated in one of two ways;

  1. Offset behind a tractor – in this position the HS2000 round bale wrapper is capable of following the natural line of the baler and can acheive high speeds.
  2. Inline behind a baler – here the HS2000 round bale wrapper will match the output of the baler.

Bale Loading

The McHale HS2000 round bale wrapper loads from the front and picks up the round bale as it comes out of the round baler. This means that when the HS2000 round bale wrapper is working behind a tractor there is no need to cross the swaths to pick up the next round bale. When working behind a fixed or variable chamber round baler the spring mounted lift arm on the HS2000 round bale wrapper will float down to the ground, which allows the bale to easily pass from the baler to the HS2000 round bale wrapper. In more testing conditions the lift arm can be programmed to move to one side, which allows it to cradle in around the bale after the bale passes from the baler to the HS2000 round bale wrapper.

The Wrapping Table

The wrapping table on the HS2000 round bale wrapper tilts forward for bale loading, this allows the round bale to gently pass from the lift arm to the bale wrapping table, reducing the stress on the chassis of the HS2000 round bale wrapper.

When the bale is on the table the wrapping cycle commences. The bale wrapping table on the HS2000 round bale wrapper is constructed of four heavy-duty belts, which ensures a smooth and even bale rotation even when dealing with loose or asymmetric bales.

A smooth wrapping seal is guaranteed as the machine delivers a 50% overlap. When the wrapping cycle is complete the wrapping table on the HS2000 round bale wrapper tilts rearward and the round bale is gently placed on the ground.

Dispensers

The HS2000 round bale wrapper is fitted with two 750mm aluminium dispensers, which are standard on all McHale high-speed round bale wrappers. The dispensers maintain a consistent stretch, which maximises film usage. The unit consists of two aluminium rollers, which are geared to each other with robust steel gears of different ratios.

This twin satellite HS2000 round bale wrapper takes approximately 20 seconds to apply four layers or 30 seconds to apply six layers of film to the round bale. This means that in inline mode behind a fixed or variable chamber round baler the HS2000 high-speed round bale wrapper will match the round balers output.

Automatic Film Break Sensing

Automatic Film Break sensing comes as standard on the HS2000 round bale wrapper. This ensures that if one of the rolls of film breaks or runs out the HS2000 round bale wrapper will detect this and slow bale rotation and increase the number of revolutions of the satellite to ensure that the bale is wrapped correctly.

If both rolls of film break or run out the HS2000 round bale wrapper notifies the operator in the cab via the control box that the machine is out of film.

Quick Fit Film Loading

The McHale HS2000 round bale wrapper is fitted with a lock and load film loading system. When the operator removes the core of the empty film roll, the top roller locks in the open position. When the new roll is loaded the operator simply pulls the cord and the top roller is released and locks down on the new roll.

Cut and Hold

As with all McHale round bale wrappers, the reliability of the cut and hold system is of the utmost importance. The HS2000 round bale wrapper, collects the film in the cut and tie rails and then gathers it to one point where it is held and then cut. This system ensures better grip and provides more consistent superior performance, particularly in hot or wet conditions.

Autopark/ Unpark

The HS2000 round bale wrapper comes standard with an auto park function, which allows the operator to fold up the machine for transport.

At the end of a job by simply selecting the auto park function on the control box the HS2000 round bale wrapper will automatically fold into its narrowest position for transportation. On arriving at the next job when the auto unpark function is selected the HS2000 round bale wrapper will fold itself out into the working position.

HS2000 Control Box

The HS2000 is a fully automatic machine. From the control console the operator can select:

  • The number of layers of wrap
  • A number of totals to store bale numbers for individual jobs
  • A full automatic cycle for flat ground or a semi-automatic cycle for hilly ground (operator selects tip function when appropriate).

The operator can also select an autopark function when leaving the field which will narrow the machine to it narrowest point for road transportation. On arrival at the next job the operator can select auto unpark and the machine will move into the working position.

The HS2000 is also fitted with film break sensors which monitor the film as it goes onto the bale. If one roll of plastic breaks or runs out the machine will notify the operator through the control console and automatically move to single dispenser mode. In single dispenser mode the machine slows bale rotation and increase the number of rotations of the satellite to compensate for the broken roll of film. If the rolls of plastic on both dispensers break or run out the control console will notify the operator with an out of film message.

Please contact us for further information on models, specifications, finance and trade in values.

McHale-Bale Wrappers-W2020-Mounted-Wrapper-Stacker

W2020 – Stacking Bale Wrapper

The McHale W2020 is a high-speed stacking bale wrapper compact machine, which allows one operator to transport, wrap and stack the bale with one tractor or loader.

The W2020 can wrap a bale with four layers of plastic in approximately 20 seconds and with six layers of plastic in 30 seconds. The W2020 is controlled by an expert plus control box, which makes wrapper operation fully automatic.

  • Fully Automatic High Output Bale Wrapper
  • RDS Expert Plus Control Box
  • Dual Stretch Dispenser (70% & 55%)
  • Folding Arm Design
  • Hydraulic Cut & Hold
  • Plastic Break Sensors
  • Fast Loading and Unloading Times
  • Twin Satellites for Stable High Speed Wrapping

Machine Mounting

The W2020 is a versatile machine, which can be attached in one of three ways:

Rear Linkage: The machine can be fitted to the rear linkage of a low horsepower tractor. This is an ideal way to mount the machine where the machine will work in soft ground conditions or on hills. The W2020 provides high speed wrapping capabilities, while keeping machine weight to a minimum and keeping the bale close to the ground for a low centre of gravity and greater stability.

Front Linkage: The machine can be fitted to the front linkage of higher horsepower tractors giving the operator good visibility and making it more comfortable for the operator to load, wrap and position bales.

Front Loader/Industrial Loader: For higher horse power tractors and industrial loaders the W2020 can be mounted on the front of the tractor or industrial loader, which will allow the operator to collect, transport, wrap and stack the bale with one machine. This eliminates the need for an extra tractor, bale handler and possibly a second driver or operator.

Fast Bale Loading & Unloading

The McHale W2020 round bale wrapper is fitted with two hydraulically power wrapping rollers. When the bale is in position the rollers move in around the bale and move the bale from the ground position to the bale wrapping position. As both rollers are powered, the bale is moved into position as quickly and efficiently as possible.

When the wrapping cycle is complete, the wrapped bale can be gently unloaded either to the ground or into the stack. During the unloading process, both rollers are allowed to free wheel with the bale to ensure that the plastic is not damaged.

Twin Dispensers

The W2020 stacking round bale wrapper is fitted with two 750mm aluminium dispensers, which are standard on all McHale high-speed round bale wrappers.

The dispensers maintain a consistent stretch, which maximises film usage. The dispenser units consists of two aluminium rollers, which are geared to each other with robust steel gears of different ratios.

This twin satellite W2020 stacking round bale wrapper takes approximately 20 seconds to apply four layers or 30 seconds to apply six layers of film to the round bale.

The twin satellite design allows for stable high-speed bale wrapping, where there is an even pull on the bale by both dispensers as it is being wrapped. This ensures that the bale remains in the correct position.

Folding Dispenser

The satellite arms on the W2020 stacking bale wrapper are designed so that at the end of the bale wrapping cycle, one of the dispensers move from its normal position and folds in toward the second dispenser. When both dispensers come together they move in a uniform movement towards the cut and hold which is located on the headstock of the machine.

Once the plastic is cut and held, the dispensers stop on the tractor or loaders side of the bale, allowing the bale to be stacked.

When the next bale is loaded and the automatic cycle starts one dispenser moves in advance of the other until the two dispensers are in a parallel position. At this point the wrapping cycle starts.

Cut and Hold

As with all McHale round bale wrappers, the reliability of the cut and hold system is of the utmost importance. The W2020 stacking round bale wrapper, collects the film in the cut and tie unit where it is held and then cut. This system ensures better grip and provides more consistent superior performance, particularly in hot or wet conditions.

The hydraulic cut and hold is located on the headstock of the machine. The cut and hold opens in a “scissors action” which allows the dispenser to rotate the film into the cut and hold, at which time the cut and hold collects the plastic and holds it firmly under hydraulic pressure.

Automatic Film Break Sensing

Automatic Film Break sensing comes as standard on the W2020 stacking round bale wrapper. This ensures that if one of the rolls of film breaks or runs out the W2020 will detect this and slow bale rotation and increase the number of revolutions of the satellite to ensure that the bale is wrapped correctly.

If both rolls of film break or run out the W2020 stacking round bale wrapper notifies the operator in the cab via the control box that the machine is out of film.

Control Box

The W2020 is a fully automatic machine, from the control console the operator can select:

  • Fully Automatic Cycle
  • Automatic Loading and Unloading
  • The Number of Layers of Wrap
  • A Number of Totals to Store Bale Numbers for Individual Jobs

The W2020 is also fitted with film break sensors, which monitor the film as it goes onto the bale. If one roll of plastic breaks or runs out, the machine will notify the operator through the control console and automatically move to single dispenser mode. In single dispenser mode the machine slows bale rotation and increase the number of rotations of the satellite to compensate for the broken roll of film. If the rolls of plastic on both dispensers break or run out, the control console will notify the operator with an out of film message.

Quick Fit Film Loading

The McHale W2020 stacking round bale wrapper is fitted with a lock and load film loading system. When the operator removes the core of the empty film roll, the top roller locks in the open position. When the new roll is loaded the operator simply pulls the cord and the top roller is released and locks down on the new roll.

Please contact us for further information on models, specifications, finance and trade in values.

McHale-998-Large-Trailed-Square-Bale-Wrappers

McHale 998 – High Output Square Wrapper

The McHale 998 square bale wrapper is the versatile high output solution for wrapping square bales. It is capable of wrapping 80 – 100 bales per hour.

Common sense design, quality components and precision engineering make the 998 square bale wrapper the trusted choice for contractors and farmers who demand high output and consistent performance in all conditions and terrain.The 998 is a unique square bale wrapper and it has the ability to move three bales at one time through its conveyor system. The 998 square bale wrapper can:

  1. Load one square bale onto the front conveyor.
  2. Move a second square bale from the front conveyor into the wrapping position.
  3. Eject the last wrapped square bale off the back of the 998 square bale wrapper.
The 998 square bale wrapper is packed with features including conveyor loading and fast positioning of the square bale into the bale wrapping position, hydraulically operated cut and tie system, auto square bale levelling and a two point linkage mounted swivel head-stock. The 998 wraps all sizes of square bale from 80cm x 70cm to 160cm x 120cm including double square bales.

The in-cab control unit enables the operator to change square bale sizes and select the desired number of film layers to be applied by the square bale wrapper. When set, one touch of the auto start button operates the complete cycle from start to finish. The patented roller angle-measuring device on the 998 square bale wrapper measures the corners of the bale and through this determines the correct number of satellite rotations. This patented system, ensures a consistent and even bale wrapping cycle where the required overlap is acheived, regardless of the square bale size or shape. The 998 operator can also select extra care wrapping, which makes the McHale 998 square bale wrapper apply additional plastic on the corners of the bale.

Front Loading Conveyor System

The front loading conveyor on the 998 square bale wrapper allows for effortless square bale loading. The conveyor can also be used to carry the next square bale as the machine finishes the wrapping process.

Once the square bale is wrapped it is automatically levelled and then placed back on the central conveyor and can be unloaded off the back of the 998 square bale wrapper.

Patented Roller Angles Measuring System

The 998 square bale wrapper features a patented roller angles measuring system, which gives a consistent and even wrap regardless of square bale size or shape.

The patented roller angle measuring system, on the 998 square bale wrapper also allows for extra care wrapping. When extra care is selected in the control box, bale rotation is slowed down at the corners of the bale and additional plastic is applied which ensures good quality square bales of silage.

Patented Oscillating Roller Bale Rotation

The patented oscillating rollers on the 998 square bale wrapper cradles the bale between the rollers as it is being wrapped. The oscillating rollers rotate the square bale at a uniform pace ensuring that the square bale receives the correct overlap, which ensures a tight seal and a high quality finish square bale of silage.

Dispenser Units

The McHale 998 square bale wrapper features two 750mm aluminium dispensers. The dispensers maintain a consistent stretch, which maximises film usage. The dispenser unit consists of two aluminium rollers, which are geared to each other with robust steel gears of different ratios.

The units are designed so that the angle that they work at during the wrapping cycles stays constant. This gives a more even stretch through the roll of film. The dispenser units also feature a McHale quick fit plastic loading system to make film changing much more user friendly on the 998 square bale wrapper.

Quick Fit Plastic Loading

On the McHale 998 square bale wrapper the dispenser’s lock and load system makes film loading really easy. When removing the core of the used roll of plastic the dispenser bobbin locks in place. When a new roll of plastic is in the loading position, it can be locked in place by simply pulling the cord on the dispenser of the 998 square bale wrapper.

Fully integrated PTO driven load sensing hydraulic system

The McHale 998 square bale wrapper has a fully integrated PTO driven load sensing hydraulic system. This simplifies tractor change over and delivers consistent performance, eliminating problems associated with different tractor hydraulic systems, oil flows and oil temperatures. The stand alone load sensing hydraulic system also reduces the risk of oil contamination.

RDS – In-Cab Control Console 

The 998 square bale wrapper features an in cab control console, which enables the operator to change the bale size and select the desired number of film layers to be applied to the square bale. When set, one touch of the auto start button operates the complete cycle from start to finish.

From the control console the operator can select the wrap start position and can also customise the wrapping programme which allows the operator to apply more plastic at eight points on the surface of the bale and store the customised programme for later jobs which have the same bale size.

Optional Equipment – Remote Control Kit & Unloading Conveyor

Should you wish to use the McHale 998 square bale wrapper for static wrapping, a remote control kit is available. This allows the machine to be used as a static machine. Here an operator can load the 998 square bale wrapper using a loader and activate an automatic cycle on the 998 square bale wrapper by using the remote control While the square bale is wrapping the operator can collect the next square bale and load it on the front conveyor. When the wrapping cycle is complete the wrapped square bale can be removed and the next bale can be wrapped with a simple click of the remote control.

Cut and Holds

As with all McHale bale wrappers the reliability of the cut and hold systems is of the utmost importance. The 998 square bale wrapper, collects the film in the cut and hold rails and then gathers it to one point where it is held and then cut. This system ensures better grip and provides more consistent superior performance, particularly when the 998 square bale wrapper is working in hot or wet conditions.

Please contact us for further information on models, specifications, finance and trade in values.
McHale-995TSR-Square-Bale-Wrappers

995TSR – Square Bale Wrapper

Trailed Single Dispenser Fully Automatic Remote Control Square Bale Wrapper with a mounting point for a hydraulic power pack.

The McHale 995 Trailed Single Dispenser Fully Automatic Remote Control Square bale wrapper range is the practical and versatile solution for wrapping large square bales. With the usual McHale common sense design, quality components and precision engineering the 995TSR square bale wrapper is the trusted choice for farmers who want high output and consistent performance for use in static locations.

On the 995 TSR square bale wrapper the rotating rollers ensure an even rotation of the bale and the efficient application of the film. Versatile too, with a simple adjustment the 995TSR square bale wrapper will equally and efficiently wrap large round bales. Like all McHale square bale wrappers, the high output 995 TSR square bale wrapper will give you a tightly wrapped bale that contains all the natural juices for increased nutritional value while improving environmental protection.

The 995TSR square bale wrapper gives an operator the flexibility of being able to mount a hydraulic power pack on the front of the machine for transportation and operation. The 995TSR also features a trailed drawbar and transportation wheels. The 995TSR square bale wrapper is an advanced square bale wrapper, which can be operated from the loading tractor by remote control, allowing for one man operation of the loading, wrapping and stacking functions.

Machine Operation- McHale 995 TSR -Trailed Single Dispenser Fully Automatic Remote Control Square Bale Wrapper with a mounting point for a hydraulic power pack.

This 995TSR square bale wrapper is fully automatic and can be controlled by a remote control from the loading tractor. The 995TSR has a specifically adapted chassis which can be used for transportation and mounting of a hydraulic power pack. When the loading tractor places the bale on the wrapping table of the linkage square bale wrapper, the operator can start the square bale wrapping process simply by pressing one button on the remote control.

The 995TSR square bale wrapper applies the preset number of layers, stops and tips the bale automatically while the operator can stack the previously wrapped square bale and bring the next netted bale to the linkage round bale wrapper for wrapping.

With this automatic remote control machine one operator can load wrap and stack the bales, thus completing the entire job.

Please contact us for further information on models, specifications, finance and trade in values.

McHale-995LM-Mounted-Small-Square-Bale-Wrappers

McHale 995 LM–Mini Square/ Mini Round Bale Wrapper

The McHale 995LM mini square bale wrapper is the practical and versatile solution for wrapping conventional square bales and mini round bales. McHales common sense design, quality components and precision engineering, mean the 995LM mini square bale wrapper is the trusted choice for farmers who want high output and consistent performance for use in static locations.

On the 995LM mini square bale wrapper the rotating rollers ensure an even rotation of the bale and the efficient application of the film. Versatile too, with a simple adjustment the 995LM mini square bale wrapper will equally and efficiently wrap mini round bales. Like all McHale square bale wrappers, the high output 995 LM mini square bale wrapper will give you a tightly wrapped bale that contains all the natural juices for increased nutritional value, while improving environmental protection.

Machine Operation – McHale 995 LM – Mini Square/ Mini Round Bale Wrapper

The operator can load the 995LM-Mini Square or Round Bale Wrapper. When the bale is on the bale wrapping table the plastic is attached to the twine on the bale.

The bale wrapper applies the preset number of layers, and the table stops at an off square position to allow the operator to easily cut the plastic and remove the bale from the wrapping table.

Patented Oscillating Roller Bale Rotation

On the 995LM mini square bale wrapper, the patented oscillating rollers cradle the square bale between the rollers as it is being wrapped. The oscillating rollers on the 995LM mini square bale wrapper rotate the bale at a uniform pace ensuring that the bale receives the correct overlap, which ensures a tight seal and a high quality finish.

When wrapping mini round bales the round bale sits between the oscillating rollers and is rotated as the 995LM bale wrapper wraps the bale.

Dispenser 

The McHale dispenser unit on the 995LM mini square/ Mini round bale wrapper is noted for its ability to maintain a consistent stretch, which maximises film usage. This unit consists of two aluminium rollers geared to each other with robust steel gears of different ratio giving an even film stretch.

Wrapping Sequence

After two revolutions in the bale wrapping cycle the valve on the 995LM mini square or mini round bale wrapper handle locks in position and remains in position until the required number of revolutions are complete. After the final revolution the table stops in an off square position to facilitate plastic loading.

RDS – Control Unit

The control unit on the 995LM bale wrapper enables the operator to select the desired number of film layers. The wizard can also store job totals and monitors the table revolution speed.

Please contact us for further information on models, specifications, finance and trade in values.

PowerWrap-Bale-Wrappers

PowerWrap Contractor Pack

The PowerWrap unit is the only system that allows you to simply drive the wrapper to the stack or wherever you wish to wrap bales. Then start up your PowerWrap and you are ready to go.

As most modern balewrappers are operated by remote hand held or in-cab device, the whole operation from bringing the bale to the wrapper, to taking the finished wrapped bale to the stack can all be completed by one man, with one tractor and a front loader system.

By utilising the right size engine to power the wrapper the whole operation uses less fuel -saving on diesel and freeing up your larger horse power tractor for other work.

As the name implies, these models are built for contractors and large scale farmers who need a large powerful 20hp engine. The 20hp engine is capable of dealing with the range of oil flows and pressures required by the big round and square wrappers on the market today.

The large oil reservoir keeps working temperatures low even during prolonged, continuous wrapping cycles. May be mounted onto the wrapper or transported separately. Variable speed kits and stand alone models are available.

Contractor PowerWrap PW208 units are available to fit:
McHale 995TSR, 991 TBER, 991BER,
Kverneland/Taarup 7520/7525, Vicon BW1600/1604, Tanco 1080.

McHale HS2000 – option model PW258 with 25hp engine and larger hydraulic oil tank. PW258 recommended for Tanco 1814.

Stand alone units
For those wanting a totally stand alone model, we offer our units mounted on their own tough steel base.Simply pick-up using fork lift, drive it into position, place down and attach the hydraulics.
This system is available for all our models. Please call to discuss.

Variable speed kits
Variable speed kits are available as an option to enable the wrapper to run at lower speeds to cope with mishapen and awkward bales.

Engine: 20Hp twin cylinder air cooled Lombardini diesel
Starting: Electric start
Fuel Tank: 16 litres
Engine Filters: Spin on fuel and oil. Oil bath air cleaner
Hydraulic oil filters: Suction and return
Hydraulic Oil: ISO 32 50 litres
Oil Flow: 18 to 40 litres/min
Oil Pressure: Up to 180 bar
Electrical Output: 12 amps 12 volts
Dimensions : Length: 800mm
Width: 600mm
Height: 850mm
Protection: Pressure release valve for hydraulics.
Return oil filter warning gauge
Warranty: 12 months parts only(subject to standard conditions of business)

Please contact us for further information on models, specifications, finance and trade in values.